This is also called an elliptical head. The shape of this Hot Press Dished Head is more economical, because the height of the hot press dished head is just a fraction of the diameter. Its radius varies between the major and minor axis; usually the ratio is 2:1.
Head plates with hot work is used to fabricate head plates that are very thick or made of special materials.
Our company can fabricated head plates with hot work max 5000mm in diameter and 250mm in thickness.When diameter is above 5000mm, we shall make new tooling for Hot Press.
For examples, Attached is the End Cap with heavy thickness specification is AH1890*52mm, we fabricated by hot press Dished Heads and export hot press dished heads to our Middle east client-Belleli engrgy FZE
Normally Heat treatment will be done after hot press in order to recover the plates original property. and request to done MT for the entire both surface.
Our company Hokkai is ASME U&U2 Stamp and can fabricated dished heads as ASME/PED/GB/JIS standard etc.
Product Categories : Hot Work Dished Head > Hot Press Dished Head
carbon material dish head
Hemispherical heads for vessel tanks
2:1 Approx ellipsoidal heads
carbon welding dish head
Hemispherical Copper Dish Head
hemispherical type head plates
Pressure Vessel tanks heads
Forming heads by Hot press